PS Audio Stellar Power Plant 3

PS Audio Stellar Power Plant 3

The Stellar Power Plant 3 stands on the shoulders of giants. Built as an evolution from our renowned P12, P15, and P20 the P3 is our most affordable regenerator – perfect for powering sources and small to medium systems. Power Plants generate sine-wave-perfect, regulated, high current AC power from your home’s AC. In the process of regeneration, problems on your power line such as low voltage, distorted waveforms, sagging power, and noise are eliminated and the power quality enhanced.

£1,916.67
 There are not enough products in stock
 Customer ratings and reviews
Nobody has posted a review yet
in this language
 

Secure Checkout - 2048-Bit EV SSL Encryption

 

Delivery policy - Free Delivery on all orders over £75

 

Return policy - 14 Day right to cancel!

PS Audio Stellar Power Plant 3

The Stellar Power Plant 3 stands on the shoulders of giants. Built as an evolution from our renowned P12, P15, and P20 the P3 is our most affordable regenerator – perfect for powering sources and small to medium systems. Power Plants generate sine-wave-perfect, regulated, high current AC power from your home’s AC. In the process of regeneration, problems on your power line such as low voltage, distorted waveforms, sagging power, and noise are eliminated and the power quality enhanced. The results are both audibly and visually stunning when powering either audio or video products. Further, the level of protection afforded connected equipment is extraordinary. You can feel 100% confident that a P3 will provide pure and safe power under any condition.

Providing 300 watts of continuous power output and peaks of 900 watts, the P3 is the perfect companion for source gear and systems running high efficiency Class D amps like the Stellar M700 monoblocks. Designed with elegant simplicity in mind, the P3 is a plug and play device that will provide you with perfect power without any fuss.

Power Plants are regarded for their ability to reduce noise and THD to virtually zero while providing rock steady voltage output. Traditional power conditioners can only affect a portion of incoming noise and are unable to compensate for over or under voltage. Furthermore, power conditioners raise the impedance of the power going to your system, which can bleach your sound and drain away dynamics. The P3 handles things completely differently. Through the P3’s active regeneration process, it is able to provide perfect power while also lowering the impedance, increasing the dynamics and openness of your system.

Best of all, the P3 features overbuilt surge and spike protection, meaning you can rest easy knowing your system is safe.

Don’t starve your music or risk damaging your equipment. A P3 gives you greatly improved performance and safety from just plugging into the wall socket and far better dynamics, more authoritative bass and a much bigger, more open soundstage than any passive power conditioner on the market. Why settle for anything but a Power Plant? Take one home and try it today.

Rear

Power Plants are available worldwide at your country’s proper voltage rating. Outlets include US, UK, German (Shuko) and Australian. For inquiries concerning different outlets or voltages outside the United States and Canada, please contact your country’s dealer or distributor, or fill out the question form on this page.

17.87 Kg
  • Built in Boulder
  • 300 watts continuous regenerated output
  • 500 watts short term regenerated output
  • 900 watts peak regenerated output
  • 1000 watts filtered output
  • 3X lower impedance than P5 Power Plant
  • 6 outlets US
  • 15 amp AC input US
  • 120 volt regulated US
  • Range 95 – 145 VAC US
  • 4 EU/AU/GR/UK outlets
  • 10 amp AC input EU/AU/GR/UK
  • 230 volt Regulated EU/AU/GR/UK
  • Range 200 –285VAC EU/AU/GR/UK
  • 100% regenerated AC
  • MultiWave
  • CleanWave
  • Pure Sine Wave
  • Remote Control
  • 48 pounds boxed
  • 17W x 4H x 14D

Environment Specification

U.S./Japan

Europe/Asia

Location

Indoor use only

Indoor use only

Duty Cycle

Suitable for continuous operation

Suitable for continuous operation

Moisture Sensitivity

Not sealed against moisture

Not sealed against moisture

Operating Humidity

<80%rh

<80%rh

Storage Temperature

-40C to +40C

-40C to +40C

Operating Temperature

0C to 40C

0C to 40C

Electrical Supply Nominal Rating

US - 120V 15A 60Hz
JP - 100V 15A 50/60Hz

230V

 

Instrument Specification

U.S./Japan

Europe/Asia

Unit Dimensions

17” W x 12” D x 3.25” H (43cm x 30.48cm x 8.255cm)

17” W x 12” D x 3.25” H (43cm x 30.48cm x 8.255 cm)

Unit Weight

31.4 lbs ( 14.24 kg)

31.4 lbs ( 14.24 kg)

Shipping Dimensions

22” x 17” x 8” (55.88cm x 43.18cm x 20.32cm)

17” W x 12” D x 3.25” H (43cm x 30.48cm x 8.255 cm)

Shipping Weight

39.4 lbs (17.87 kg)

39.4 lbs (17.87 kg)

Nominal Input Voltage

US - 108 – 145 VAC
JP - 85 – 125 VAC

200 –270 VAC

Maximum Continuous Load

US - 300VA
JP - 300VA

300VA

Maximum Peak Load (30 seconds)

1000VA

1000VA

Voltage Regulation

<0.1%

<0.2%

Typical Output THD

<0.3%

<0.3%

Output Impedance

<0.008 ohm

<0.008 ohm

Efficiency @ 300VA

>85%

>85%

Input Frequency

45 – 65 Hz

45 – 65 Hz

Energy Dissipation

680J

850J

Peak Current Surge

60,000A

60,000A

Max Surge Voltage

6,000V

6,000V

Clamp Level

340V

800V

DC Trigger

None

None

You might also like

 Reviews

Be the first to write your review !